Go Back  DVD Talk Forum > DVD Discussions > DVD & Home Theater Gear
Reload this Page >

onkyo575 set up--need help

DVD & Home Theater Gear Discuss DVD and Home Theater Equipment.

onkyo575 set up--need help

Old 01-28-01, 06:28 PM
  #1  
New Member
Thread Starter
 
Join Date: May 1999
Location: Whitehall, MI
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
I did a search-so sorry if this has been asked before. I got the onkyo 575 and toshiba 1600--when i try to play a dts dvd I have no sound! yet if i set it to stereo I have sound. I got the onkyo because it has dts decoder, the 1600 has a dts out--so what am I doing wrong?
steve
Old 01-28-01, 07:17 PM
  #2  
Cool New Member
 
Join Date: Oct 2000
Posts: 39
Likes: 0
Received 0 Likes on 0 Posts
Are you using a Digital Coax cable or an digital optical cable? Without these you won't be able to decode the DTS or Dolby Digital coming from your DVD player.

BrianGT
Old 01-29-01, 06:48 PM
  #3  
New Member
Thread Starter
 
Join Date: May 1999
Location: Whitehall, MI
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
well i got sound now-when i play appollo13 and choose the dts sound. except the display on the receiver says pro logic? theres also a dolby digital light on. the manual says to push the dts button--but that doesn't seem to work. yes i have the digital coax .
any other ideas or suggestions would greatly help--as you can tell i've never hooked this stuff up before--thanks---steve
Old 01-29-01, 07:19 PM
  #4  
Member
 
Join Date: Oct 1999
Location: Castro Valley, CA, USA
Posts: 164
Likes: 0
Received 0 Likes on 0 Posts
I have the same receiver. You must be sure that your player set-up menu is set for DD and DTS output. Also, your receiver must be set to receive a digital signal. You may use optical, or digital coax to transfer the signal from the player to the 575. Just be sure the 575 knows it's a digital signal.

You can also try switching the DSP from pro-logic to DTS.

------------------
Old 01-30-01, 09:31 PM
  #5  
New Member
Thread Starter
 
Join Date: May 1999
Location: Whitehall, MI
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
ok now i'm getting really frustrated. i have the digital coax going from the dvd to receiver---the dvd set for dts--the analog on the reciever set to digital coax 1. ok now i see the prologic lit--the dolby digital lit on the top with red square around it--i try to push the dts button but get the same display? i use the dsp's get orchestra-stereo---yadda yadda -but no lights say dts--is this correct? please help!
thanks again--steve

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.