Do they make a Component to RGB cable?
10-01-06 | 11:50 PM
#1
Thread Starter
DVD Talk Gold Edition
Joined: Nov 1999
Posts: 2,486
Likes: 0
Received 1 Like
on
1 Post
From: Stuck doing T.P.S. reports for Lumbergh!!!!
Do they make a Component to RGB cable?
I need a Component to RGB cable for one of my LCD TVs that will only accept HD through RBG. Any help would be great!
10-02-06 | 02:19 AM
#3
DVD Talk Special Edition
Joined: Oct 2006
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
Are you talking about a cable with 15-pin VGA plug on one end and RCA component plugs on the other? I believe that's called a "breakout cable", and they're not too terribly hard to come by. Bettercables has 'em.
10-02-06 | 08:47 AM
#6
DVD Talk Legend
Originally Posted by edstein
On a similar note, do they make a VGA -> HDMI adapter? I've seen VGA -> DVI and DVI -> HDMI but I'd like to skip that middle step.
DVI can be either digital or analog. The VGA-to-DVI adaptors only work with DVI-A signals, the analog type, which is rarely used. They won't work with DVI-D, the more common digital type.
Similarly, to change component (which is YPbPr) to RGB, you need a transcoder, not a simple adaptor. The confusion here stems from the fact that the VGA inputs on many video projectors will accept either YPbPr or RGB. If the input accepts YPbPr, all you need is a simple adaptor. If it only accepts RGB, you need a transcoder.
Last edited by Josh Z; 10-02-06 at 08:49 AM.
10-02-06 | 10:17 AM
#7
DVD Talk Limited Edition
Joined: Mar 2002
Posts: 6,830
Likes: 0
Received 0 Likes
on
0 Posts
From: Mpls, MN
Originally Posted by Josh Z
VGA is analog and HDMI is digital. You need more than a simple adaptor.
DVI can be either digital or analog. The VGA-to-DVI adaptors only work with DVI-A signals, the analog type, which is rarely used. They won't work with DVI-D, the more common digital type.
DVI can be either digital or analog. The VGA-to-DVI adaptors only work with DVI-A signals, the analog type, which is rarely used. They won't work with DVI-D, the more common digital type.
10-02-06 | 11:31 AM
#8
DVD Talk Hall of Fame
I see. I was looking for a solution to hook my 360 vga cable to my HDMI inputs on my reciever. Which will ultimately end up connected to a projector with both HDMI and VGA inputs. I was just trying to avoid routing more than one cable to the projector.
10-02-06 | 12:09 PM
#9
DVD Talk Legend
Originally Posted by edstein
I see. I was looking for a solution to hook my 360 vga cable to my HDMI inputs on my reciever. Which will ultimately end up connected to a projector with both HDMI and VGA inputs. I was just trying to avoid routing more than one cable to the projector.
10-02-06 | 04:35 PM
#10
DVD Talk Hall of Fame
Originally Posted by Josh Z
Will the receiver transcode the analog Component output from the XBox to HDMI? Some will, some won't.
