Protection while playing DVDs
#1
Thread Starter
Senior Member
Joined: Apr 2004
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
Protection while playing DVDs
Hi. I'm really anal about any nicks or scratches after playing by disc in my player.. Occation, I might find a something that I don't think I saw before I put the disc in my player.. Can't afford to get a new player right (maybe I should stop buying DVDs for a while)..
Are there any product on the market that I can use to help protect my DVDs from an wear? I was thinking about some kind of protective layer that I could apply to the DVD while playing.. Or would something like that prevent the laser from reading the disc properly?
Thanks
Are there any product on the market that I can use to help protect my DVDs from an wear? I was thinking about some kind of protective layer that I could apply to the DVD while playing.. Or would something like that prevent the laser from reading the disc properly?
Thanks
#2
DVD Talk Legend
No offense, but I would look into counseling for obsessive-compulsive disorder (OCD).
There are "disc shields" on the market, but I don't like the thought of sticking something to the playing surface of my discs that could, in the long-run, react with the disc itself. Not to mention, if you don't place it correctly the disc could be off balance (DVDs spin much faster than CDs).
There are "disc shields" on the market, but I don't like the thought of sticking something to the playing surface of my discs that could, in the long-run, react with the disc itself. Not to mention, if you don't place it correctly the disc could be off balance (DVDs spin much faster than CDs).
#4
DVD Talk Hero
I agree with Mr. Salty.... on both points.
Just because you get a little nick on a DVD you'll consider buying a whole new player?
Just because you get a little nick on a DVD you'll consider buying a whole new player?
#5
Thread Starter
Senior Member
Joined: Apr 2004
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TomOpus
I agree with Mr. Salty.... on both points.
Just because you get a little nick on a DVD you'll consider buying a whole new player?
Just because you get a little nick on a DVD you'll consider buying a whole new player?
I was looking through my bill and looks like it's still within it's warranty.. If it's not too much of an expense, maybe I can take it back to get it looked at.. Maybe it just needs a good cleaning..
I was thinking of trying a lens cleaner myself, but I thought I saw a thread that mentioned that ones with brushes do more harm than good. What other kinds are there?
Thanks
#6
Senior Member
Joined: May 2004
Posts: 610
Likes: 0
Received 0 Likes
on
0 Posts
Thing one: nothing is supposed to come into contact with the disc surface while playing the disc. This includes the lens. If the lens is touching the disc, the player needs service (and playback would be compromised anyway). If anything else is contacting the disc, that's a player malfunction.
Thing two: Think twice about applying anything to the disc. It gets hot in there.
Thing three: If you're not sure your player is causing these nicks and scratches, why not do some systematic tests? Start carefully inspecting your discs before putting them in the player, noting (or even digitally photographing) any pre-existing damage. Compare afterwards. Then you'll know for sure.
Thing four: If the disc plays properly, relax. That's what matters.
RichC
Thing two: Think twice about applying anything to the disc. It gets hot in there.
Thing three: If you're not sure your player is causing these nicks and scratches, why not do some systematic tests? Start carefully inspecting your discs before putting them in the player, noting (or even digitally photographing) any pre-existing damage. Compare afterwards. Then you'll know for sure.
Thing four: If the disc plays properly, relax. That's what matters.
RichC
#8
DVD Talk Ultimate Edition
Joined: Sep 2002
Posts: 4,949
Likes: 0
Received 1 Like
on
1 Post
From: on a river in a kayak..where else?
Originally Posted by johnsun
I was thinking of trying a lens cleaner myself, but I thought I saw a thread that mentioned that ones with brushes do more harm than good. What other kinds are there?
Thanks
#9
DVD Talk Hall of Fame
Joined: Jul 2000
Posts: 9,380
Likes: 0
Received 1 Like
on
1 Post
From: In a small pocket universe hoping to someday become a Moderator Emeritus at DVDTalk.com!
There is a protective coating for DVDs called "DVD Skins" I believe. I saw in an ad for it in Video Business magazine if I recall correctly.
#10
DVD Talk Legend
Wait a minute -- your *player* is scratching your discs? That doesn't sound right... are you sure?
If it is -- you need to get that fixed immediately. Why worry about how to "protect" your discs when it's a faulty machine that's causing the problem. Fix the problem at the source.
If it is -- you need to get that fixed immediately. Why worry about how to "protect" your discs when it's a faulty machine that's causing the problem. Fix the problem at the source.
#11
DVD Talk Special Edition
Joined: Feb 1999
Posts: 1,075
Likes: 0
Received 0 Likes
on
0 Posts
From: Easton, PA
I've seen discs get scratched or more likely marred from just putting it onto the tray. There could be dust or dirt on the tray and when you slide or drop the disc in there it's enough to mar the surface but not enough to actually scratch it usually.
#12
DVD Talk Legend
I have heard of game consoles scratching discs. On another forum I read that someone had a PSOne leave concentric scratches on a disc, and someone else said he has had a PS2 and Xbox scratch discs. Heck, one poster said his PS2 actually broke a game in half!
I suppose it's not outside the realm of possibility, since the PS2 and Xbox have drive mechanisms similar to what is in a standard DVD player (at least I think they do-maybe I'm wrong). I would second the recommendation of carefully examining a disc, and then putting it in your player, and then examining it again to see if it looks any different than before it was in the player. Also, make sure you examine the discs with adequate light. Some scratches are so slight you don't see them without enough light, or if the light is from a certain angle, etc.
I suppose it's not outside the realm of possibility, since the PS2 and Xbox have drive mechanisms similar to what is in a standard DVD player (at least I think they do-maybe I'm wrong). I would second the recommendation of carefully examining a disc, and then putting it in your player, and then examining it again to see if it looks any different than before it was in the player. Also, make sure you examine the discs with adequate light. Some scratches are so slight you don't see them without enough light, or if the light is from a certain angle, etc.
#14
DVD Talk Limited Edition
Originally Posted by Fok
Are CD's more durable than DVDs? it seems that a surface of a DVD is a lot more sensitive to scatches and stuff.
#15
Thread Starter
Senior Member
Joined: Apr 2004
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by rdclark
Thing one: nothing is supposed to come into contact with the disc surface while playing the disc. This includes the lens. If the lens is touching the disc, the player needs service (and playback would be compromised anyway). If anything else is contacting the disc, that's a player malfunction.
Originally Posted by rdclark
Thing three: If you're not sure your player is causing these nicks and scratches, why not do some systematic tests? Start carefully inspecting your discs before putting them in the player, noting (or even digitally photographing) any pre-existing damage. Compare afterwards. Then you'll know for sure.
I'm learning to let some stuff go, but this is the first time I saw something I didn't recall seeing after it's been played.. I can't say I have a photographic memory, but I was pretty sure that the discs was flawless before going into the player..
Thanks
#16
DVD Talk Gold Edition
Joined: Jun 2004
Posts: 2,063
Likes: 0
Received 0 Likes
on
0 Posts
From: S.S.F. CA
#17
DVD Talk Special Edition
Joined: Dec 2003
Posts: 1,020
Likes: 0
Received 0 Likes
on
0 Posts
From: In the woods
Originally Posted by johnsun
I was thinking of trying a lens cleaner myself, but I thought I saw a thread that mentioned that ones with brushes do more harm than good. What other kinds are there?
Thanks
#18
Thread Starter
Senior Member
Joined: Apr 2004
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by U6C84
#20
Banned
Joined: Mar 2004
Posts: 3,019
Likes: 0
Received 0 Likes
on
0 Posts
From: So. Illinois
Question for anybody here...
If nothing is supposed to have contact with the disc inside the machine, then what happens to the disc when the tray closes? Does it get suspended by the center drive mechanism up off the tray or what?
If nothing is supposed to have contact with the disc inside the machine, then what happens to the disc when the tray closes? Does it get suspended by the center drive mechanism up off the tray or what?
#21
DVD Talk Special Edition
Joined: Jul 2002
Posts: 1,747
Likes: 0
Received 0 Likes
on
0 Posts
From: Portland OR
If nothing is supposed to have contact with the disc inside the machine, then what happens to the disc when the tray closes? Does it get suspended by the center drive mechanism up off the tray or what?
#22
DVD Talk Special Edition
Joined: Oct 2002
Posts: 1,269
Likes: 0
Received 0 Likes
on
0 Posts
From: East Coast
yes, i'm sure it gets lifted off the tray by the clamp mechanism at the center of the disc. nothing should be touching the disc as it spins; if something is scratching the disc during playback (i.e., laser pickup or some foreign object), then your player needs to be serviced. my old LD player did make scratches, but none of the dvd or cd players i have ever did.
Originally Posted by Mike Lowrey
Question for anybody here...
If nothing is supposed to have contact with the disc inside the machine, then what happens to the disc when the tray closes? Does it get suspended by the center drive mechanism up off the tray or what?
If nothing is supposed to have contact with the disc inside the machine, then what happens to the disc when the tray closes? Does it get suspended by the center drive mechanism up off the tray or what?




