Go Back  DVD Talk Forum > DVD Discussions > DVD & Home Theater Gear
Reload this Page >

TW65X81 & Image Artifacts

Community
Search
DVD & Home Theater Gear Discuss DVD and Home Theater Equipment.

TW65X81 & Image Artifacts

Thread Tools
 
Search this Thread
 
Old 02-05-01 | 03:12 PM
  #1  
Thread Starter
Member
 
Joined: Dec 1999
Posts: 235
Likes: 0
Received 0 Likes on 0 Posts
Hi, I recently upgraded to a tw65x81 from the tw40x81, and had it ISF calibrated by a tech from San Antonio (Siegfriend at Bjorn's Audio & Video). He is the same guy who calibrated my 40", and both times it looked great. However, all of a sudden yesterday, I noticed that the tw65x81 started to exhibit artifacts. It's almost as if anything bright on the screen is ghosted off to the right side a bit, with little black horizontal lines stretched to the side. This is particularly glaring whenever a bright letter or number is on the screen, because you can see the left edge of the character ghosted onto the character itself, causing very noticeable shadows. This is also easy to see if the tv is in standard mode, with no input. The border between the black center and the right gray bar is ghosted onto the gray bar for about 1.5". This happens regardless of mode (standard, theaterwide, and full) and with any input source (cable, video 1-3, colorstream 1-2). Does anyone have any idea at all what might be causing this? I checked to make sure that SVM was still disabled (I'd disabled it before the calibration by unplugging the power connector from the mainboard), and that the screen was still on tight. Everything seems to be in order. I'd be grateful for any suggestions as to where I might start looking for the source of this. Thanks for any help in advance.
Old 02-05-01 | 06:16 PM
  #2  
DVD Talk Gold Edition
 
Joined: Aug 1999
Posts: 2,788
Received 49 Likes on 27 Posts
From: Chicago, IL
Erasmus,
Sorry, I can't help you there, my set
still is working fine (knock on wood!).
I just wanted to ask, what is SVM and what
advantage do you get when you disable it, and
how is it done, in case I wanna.
Thanks and hope you fix your telly!

Neitzl
Old 02-07-01 | 06:03 PM
  #3  
Thread Starter
Member
 
Joined: Dec 1999
Posts: 235
Likes: 0
Received 0 Likes on 0 Posts
Neitzl, you can find a lot more information that I know about SVM at the following website:
http://www.keohi.com/keohihdtv/usefulinfo/toshiba/svm_disable.html

Hope this helps you out.
Old 02-07-01 | 06:05 PM
  #4  
Thread Starter
Member
 
Joined: Dec 1999
Posts: 235
Likes: 0
Received 0 Likes on 0 Posts
To anyone who might be able to help, I took some pictures of what the artifacts look like on my tv - the entire screen looks like it's smeared to the right, evident by the black trails next to each letter on the screen and by the snow on the gray border. Thanks for any help any can give me!
<img src="http://www.io.com/gulfcoastjuniors/IMAGE001.jpg"


<img src="http://www.io.com/gulfcoastjuniors/IMAGE002.jpg"


<img src="http://www.io.com/gulfcoastjuniors/IMAGE005.jpg"


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.