Help with Panny TH50PX75U "first 100 hours" settings
 

Just had my new TH50PX75U installed on the wall yesterday, and I know there's a few others here with the same set.

What are you using for burn-in settings, with regard to brightness, etc?

And yes, I know I could sift through that long thread at AVS, but one of my parents is critically ill, and I don't really have the patience or time to do so right now. I'm more than a little emotionally frazzled.

Sorry for dragging my personal life into this, but any suggestions would be appreciated.

Just make sure the brightness and contrast are turned down.

Zero out all the first set of video settings for the 1st 100 hours or so.

Do a search on AVs for the Break in disc to help speed up the process. I threw it on when I was at work and sleeping and was thru the 100 hours in less than a week. You could also leave the channel on Discovery if you have it as they broadcast in HD 24/7.

Yup, put all the video settings to zero and use the break-in disc.

Color Temp: Warm
Mode: Standard
Picture: +24
Brightness: +1
Color: +2
Tint: -3
Sharpness: -14

according to the plasmatvbuyingguide:

http://plasmatvbuyingguide.com/plasm...5u-review.html