What did you get for Christmas or What do you now have to hook up!
I bought myself a new PJ, HD70. Got it about two weeks ago and hooked it up temporarily. Now have to decided on exact location and hide the wires.
Also, last minute, found my son a PS3, so this afternoon going to hook that up temporarily to make sure all is working and find a good home for it. What did everyone else get? Lots of stuff to hook up??? |
Let me tell you, the PS3 looks incredible on the HD70! I already had the HD70, but the PS3 was a Christmas gift. I also got a splitter that I have to hook up b/c I have too many component outputs!
|
Yea, well I'm having a heck of a time getting up and running. I was going thru the menu thru composite. I set Display to HDMI and then lost everything! No more display on HDMI or composite. Tried turning everything off and on, nothing.
Suggestions? |
Originally Posted by Sdallnct
Yea, well I'm having a heck of a time getting up and running. I was going thru the menu thru composite. I set Display to HDMI and then lost everything! No more display on HDMI or composite. Tried turning everything off and on, nothing.
Suggestions? I powered off/back on and the setup came up again. Do you have an HDMI input and cord? Just plug it in long enough to switch it back. |
My goal is to use HDMI for video and Optical for audio (my HT receiver does not accept HDMI).
Well I'm up and running in full analog! Composite on video and just L/R RCA's for audio. Also, I checked my HDMI using a dvd player and it seems to work fine. I also got a video signal thru the PS3 on HDMI, but it seemed to freeze. So letting my son play a little on analog to get the hang of it and have some fun. Where do I go in to set up the HDMI? The display or BD player? Or both? And when I tried to select Optical for audio, I ran into a dead end. After selecting the DTS it wouldn't let me hit select. |
OK, rocking and rolling on BD with HDMI and Optical! Yea...but...no audio on games :( hummm...
|
I'm still trying to get my pc to work on my projector.
So much for media convergence :grumble: :mad2: |
Originally Posted by Sdallnct
OK, rocking and rolling on BD with HDMI and Optical! Yea...but...no audio on games :( hummm...
|
Was lucky as just getting a Wii (earlier) so that was real easy to hook up (even my wireless was pretty simple)...Only problem is that I am basically all out of inputs for my TV, so I guess its time for a new one. Well at least a new reciever :D
|
Originally Posted by gijon213
Have you updated to v. 1.32?
Does the update fix that glitch??? I have not hooked up to my wireless network yet. That is my project today. Tho now that I know everything works, I need to unhook it all so I can run the HDMI in the attic. In doing my research is seems the PS3 is a little "fickle". Most are saying this will be improved with firmware upgrades. I hope so. One of the reasons my theater room is such a hit with the family is that it is so easy to "just turn on" (I work out of town a lot). I'm already disappointed I can't use my Harmony 880 on it. But figure sooner or later Harmony will come out with a remote that will work with it. |
Snagged a new Motorola Q for my info on the go needs and snagged a PS3 last night while browsing Wal-mart. So I'm now officially Dual Format and have both big name gaming systems. Now to find a Wii. EIther way, great X-mas as it was my 1 1/2 yr old son's first xmas where he could officially enjoy the gifts. Priceless man, priceless.
|
I bought all my Christmas presents myself beforehand. Boy were they fun to hook up. Finally have everything working perfectly though (see sig).
|
Originally Posted by Sdallnct
I did some research and see there is a "glitch" that when you use optical and switching from movie to game, you sometimes don't get sound to the game. This morning I popped in a game and got sound thru optical.
Does the update fix that glitch??? I have not hooked up to my wireless network yet. That is my project today. Tho now that I know everything works, I need to unhook it all so I can run the HDMI in the attic. |
PS3 is updating now. It had version 1.10 and going to 1.32, wirelessly...so moving along...
|
Speaking of wireless, is there anyway to increase the range of the PS3 built in wireless? My laptop is in the same room, and it connects fine. But the PS3 can sometimes see the signal (35%-50%), but it won't connect to the internet.
I ran the cable to the same room, and hooked up my modem and router and the PS3 connects fine if the router is in the same room. I get the same results if I have WPA on or off. |
Originally Posted by IDrinkMolson
Speaking of wireless, is there anyway to increase the range of the PS3 built in wireless? My laptop is in the same room, and it connects fine. But the PS3 can sometimes see the signal (35%-50%), but it won't connect to the internet.
I ran the cable to the same room, and hooked up my modem and router and the PS3 connects fine if the router is in the same room. I get the same results if I have WPA on or off. |
Originally Posted by IDrinkMolson
Speaking of wireless, is there anyway to increase the range of the PS3 built in wireless? My laptop is in the same room, and it connects fine. But the PS3 can sometimes see the signal (35%-50%), but it won't connect to the internet.
I ran the cable to the same room, and hooked up my modem and router and the PS3 connects fine if the router is in the same room. I get the same results if I have WPA on or off. http://forum.dvdtalk.com/showpost.ph...1&postcount=14 |
The software upgrade did the trick. No audio problems now with either games or movies.
|
Originally Posted by Sdallnct
The software upgrade did the trick. No audio problems now with either games or movies.
|
Well, I'm more or less looking for a new receiver as well....
Long story, but basically I'm having an issue with my new projector (HD70). I get this large slight dark then the rest of the picture band slowly float from the bottom of the picture to the top and repeat. I have pretty much narrowed it down to some component cables are using must be getting interference (I get it from several sources, but not with the PS3 thru HDMI). I'm trying to decide if I just want to order decent compent cables (I'm using cheap RG6 cables with screw on RCA ends) of if perhaps I'm ready to go 100% HDMI over audio and video. Of course then also got to think about the HDMI v1.3 issue as well. |
I bought myself a Samsung 40" LCD TV, with a 5.1 home theatre system, as an early Christmas gift. Now, I've gotta' find out how to set it up correctly, so that I can get optimal image/sound quality. (That's why I created another thread.)
|
Originally Posted by Sdallnct
Well, I'm more or less looking for a new receiver as well....
Long story, but basically I'm having an issue with my new projector (HD70). I get this large slight dark then the rest of the picture band slowly float from the bottom of the picture to the top and repeat. I have pretty much narrowed it down to some component cables are using must be getting interference (I get it from several sources, but not with the PS3 thru HDMI). I'm trying to decide if I just want to order decent compent cables (I'm using cheap RG6 cables with screw on RCA ends) of if perhaps I'm ready to go 100% HDMI over audio and video. Of course then also got to think about the HDMI v1.3 issue as well. |
Originally Posted by gijon213
Are you using them for your long run to your projector? Do they go near any speakers? What height do you live at?
I have narrowed it down to either some sort of ground loope or interference thru the cables. I didn't have it on my X1, but it's there now on the HD70. I ordered some CL-2 rated component cables thru monoprice, hopefully that will take care of the issue. |
Originally Posted by Sdallnct
25ft run thru the attic. There is also faceplaces, one at my equipment, one at the pj.
I have narrowed it down to either some sort of ground loope or interference thru the cables. I didn't have it on my X1, but it's there now on the HD70. I ordered some CL-2 rated component cables thru monoprice, hopefully that will take care of the issue. |
Originally Posted by gijon213
I had a similar problem with a run, and I realized that it was too close to my Base unit. I bet your new Component cable will really help out.
I do eventually hope to go 100% HDMI. Despite my best efforts I have a mess behind my equipment, and all HDMI would be sweet. But not quite ready for that. Close...but not yet. |
All times are GMT -5. The time now is 04:41 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.