---

---

---

---

---

The 3 Sea Shells User Guide

A personal private area cleansing system (bidet) integrated into a toilet.

Note: There is no need to flush the toilet while sitting on it. Sensors in the bowl know when its to full and it will flush automatically. 100% guaranteed not to clog.

1.) Push first sea shell to activate self-opening toilet lid.
2.) Once you sit down the first shell is reset.
3.) Commence the doing of your business.
4.) Once complete push first sea shell to activate warm soapy solution stream. Adjust your body as needed to target stream to desired body part. Push shell again to stop.
5.) Push second sea shell to activate the warm water stream to rinse away the soapy solution. Press shell again to stop. If you feel like you need to repeat this process then go back to step 4. Otherwise go to the next step.
6.) Push the third shell to activate the warm air blower to dry off the moisture. Press the shell again to stop. You may go back to step 5 if you feel to dry. Otherwise go to the next step.
7.) Upon sitting up the shells are reset and the toilet flushes.
8.) Press the second shell to close the toilet lid seals shut. Upon doing this the self-cleaning system comes on flooding the toilet bowl with extremely hot water mixed with a bleach type cleansing solution. The seat is sterilized with a anti-bacterial steam mist. The system then flushes one last time.
9.)You may now press the third shell to activate air deodorizer. Repeat pressing the shell as needed. Please be considerate of others and don't skip this step. After 1 minute all shells are reset.
10.) Congratulations on using the toilet of the future.

---