Help With Onkyo TX-DS484
#1
Member
Thread Starter
Join Date: Nov 2001
Location: New York, NY
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Help With Onkyo TX-DS484
Hi, I'm fairly new to this and I was wondering how I can get audio from my T.V. My dvd player works fine but I'm not sure how to get sound to come out of the T.V. since the 484 only has a monitor out for the video for the T.V. Where am I supposed to plug the audio?
Thanks,
RaSeRuZ
Thanks,
RaSeRuZ
#3
Member
Thread Starter
Join Date: Nov 2001
Location: New York, NY
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
I dunno...for the onkyo receiver, it has the monitor out tv thing in the back of it. that's the yellow colored plug. so i just plugged that into some yellow plug in the back of the tv. i think i plugged it under video 1 yellow slot. is that right? what am i doing wrong?
Thanks,
RaSeRuZ
Thanks,
RaSeRuZ
#4
DVD Talk Legend
The point of using the video connection with the receiver is so that you can switch multiple video sources without having to change from one input on your TV to the other. The sound, though, is supposed to come from the Onkyo receiver and the speakers you have connected to it, not the crappy little speakers that are built into the TV.
If your TV has an s-video input, use the s-video output jack of your DVD player. You'll get a much better picture than you will using the "composite" connection, which is what the yellow cable is.
Either way, there is no audio signal going to your TV. See my explanation above. If you still want to use the speakers on your TV for some reason, you'll have to run red and white analog stereo audio cables from the DVD player's output jacks to the TV.
If your TV has an s-video input, use the s-video output jack of your DVD player. You'll get a much better picture than you will using the "composite" connection, which is what the yellow cable is.
Either way, there is no audio signal going to your TV. See my explanation above. If you still want to use the speakers on your TV for some reason, you'll have to run red and white analog stereo audio cables from the DVD player's output jacks to the TV.
#5
Member
Thread Starter
Join Date: Nov 2001
Location: New York, NY
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
for my old setup, which was dolby pro logic, it was a very old system, i had my tv speakers turned off and used my surround speakers for sound. but it required using the composite cables. the red and white.
i don't understand how i can get sound to come out of the receiver if the only thing connected from the tv to the receiver is just the yellow plug alone, which would be the video cable.
my tv does have a s-video jack but i don't got s-video cable, soon though. but wouldn't using the s-video jack from the tv to the dvd player bypass the receiver? the composite plugs i used to hook up the dvd player to the receiver would be obsolete?
your explanation above says the sound is supposed to come out of the speakers from the receiver, but where is the sound supposed to come from? i think i'm missing something here...
mess is getting bigger and bigger...please help
Thanks,
RaSeRuZ
ps. oh um, I'm not sure if you thought i meant no sound when playing a dvd, i meant no sound when just regularly watching tv.
i don't understand how i can get sound to come out of the receiver if the only thing connected from the tv to the receiver is just the yellow plug alone, which would be the video cable.
my tv does have a s-video jack but i don't got s-video cable, soon though. but wouldn't using the s-video jack from the tv to the dvd player bypass the receiver? the composite plugs i used to hook up the dvd player to the receiver would be obsolete?
your explanation above says the sound is supposed to come out of the speakers from the receiver, but where is the sound supposed to come from? i think i'm missing something here...
mess is getting bigger and bigger...please help
Thanks,
RaSeRuZ
ps. oh um, I'm not sure if you thought i meant no sound when playing a dvd, i meant no sound when just regularly watching tv.
Last edited by raseruz; 11-01-01 at 10:07 PM.
#6
DVD Talk Platinum Edition
Join Date: May 2001
Location: In my Home Theater- Foley, AL
Posts: 3,503
Likes: 0
Received 0 Likes
on
0 Posts
Connect the red & white audio out from the back of your TV to the AUDIO inputs of Video 1 or 2 on the Onkyo Receiver. That way, you can get the TV sound through your Onkyo Receiver.
You should really just be using your TV as a monitor (just to watch a video source). That's why the Onkyo has a monitor output (video) but no audio.
Question:
Are you wanting to do this so you can listen to:
1) Broadcast TV (Antenna)
2) Cable box
3) Satellite
4) VCR
If you'll post what equipment you have that you want to use in the setup, I'll be happy to recommend the proper connections!
I'm familiar with the Onkyo TX-DS484 as I sell Onkyo equipment.
Sonicflood
You should really just be using your TV as a monitor (just to watch a video source). That's why the Onkyo has a monitor output (video) but no audio.
Question:
Are you wanting to do this so you can listen to:
1) Broadcast TV (Antenna)
2) Cable box
3) Satellite
4) VCR
If you'll post what equipment you have that you want to use in the setup, I'll be happy to recommend the proper connections!
I'm familiar with the Onkyo TX-DS484 as I sell Onkyo equipment.
Sonicflood
#7
Member
Thread Starter
Join Date: Nov 2001
Location: New York, NY
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Yah, I want to use it with my cable tv, trying to get sound from it. So just plugging the red and white plug to the video one on the receiver it will work? Right now my speaker system is somewhat old. Just an old Sony 5 piece system. Center, 2 fronts, and 2 surrounds. I think i can hook up the rest of the equipment, but I wanna know how to get sound from watching regular cable tv.
Thanks,
RaSeRuZ
Thanks,
RaSeRuZ
#8
DVD Talk Platinum Edition
Join Date: May 2001
Location: In my Home Theater- Foley, AL
Posts: 3,503
Likes: 0
Received 0 Likes
on
0 Posts
Yes, it's as easy as that! Just plug the Left & Right Audio OUT from your TV into Video 1 (or other input) on the Onkyo.
If you run into any problems, feel free to post them here and I'll try to help!
Sonicflood
If you run into any problems, feel free to post them here and I'll try to help!
Sonicflood
#9
Member
Thread Starter
Join Date: Nov 2001
Location: New York, NY
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Yay!! hehe, i'm so dumb. finally got the sound the come out of my speakers instead of the tv ones. but when watching tv, only 3 of the 5 speakers work. just the center, left speaker, and left surround, the right side doesn't work. but in dvd mode, all channels work. Do you know why?
Thanks,
RaSeRuZ
Thanks,
RaSeRuZ
#10
DVD Talk Platinum Edition
Join Date: Aug 2001
Location: Suwanee, GA
Posts: 3,130
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by raseruz
Yay!! hehe, i'm so dumb. finally got the sound the come out of my speakers instead of the tv ones. but when watching tv, only 3 of the 5 speakers work. just the center, left speaker, and left surround, the right side doesn't work. but in dvd mode, all channels work. Do you know why?
Thanks,
RaSeRuZ
Yay!! hehe, i'm so dumb. finally got the sound the come out of my speakers instead of the tv ones. but when watching tv, only 3 of the 5 speakers work. just the center, left speaker, and left surround, the right side doesn't work. but in dvd mode, all channels work. Do you know why?
Thanks,
RaSeRuZ
Oh, and I'm guessing you probably have 2 audio outputs on your TV, and then you have that going to the Video 1 or 2 outputs on the back of the Onkyo (I have the same receiver). Well, since I have an older TV that does not have these outputs, I had to use my VCR, and to get sound out of all 5 speakers I had to get a Y connector that connected the Red/White from the Onkyo up to plug into the output on the VCR. I am guessing you will have to do the same for yours since you are only getting one channel (one side) of audio. You'll have to find which plug on your TV is actually sending the signal (probably labeled output) and get a Y cable and hook it up that way. You can find them at Target or Wal Mart.
Good Luck.
#11
Member
Thread Starter
Join Date: Nov 2001
Location: New York, NY
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Hi, I need more help...all that stuff above, it works perfectly fine.
But now I recently bought Monster Cable Video 2 S-Video Cable. Since my Onkyo 484 doesn't have an outlet for it, i hooked it up straight to my Wega 32" Tv. When I play a dvd, I get picture but I get no sound. I thought S-Video cable does both picture and sound? Am I wrong?
Thanks,
RaSeRuZ
ps. Oh and uh...how can I fix the problem? Almost forgot to write my main question. =P
But now I recently bought Monster Cable Video 2 S-Video Cable. Since my Onkyo 484 doesn't have an outlet for it, i hooked it up straight to my Wega 32" Tv. When I play a dvd, I get picture but I get no sound. I thought S-Video cable does both picture and sound? Am I wrong?
Thanks,
RaSeRuZ
ps. Oh and uh...how can I fix the problem? Almost forgot to write my main question. =P
#12
DVD Talk Special Edition
Join Date: Feb 2001
Location: Brampton, Ontario, Canada
Posts: 1,611
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by raseruz
Hi, I need more help...all that stuff above, it works perfectly fine.
But now I recently bought Monster Cable Video 2 S-Video Cable. Since my Onkyo 484 doesn't have an outlet for it, i hooked it up straight to my Wega 32" Tv. When I play a dvd, I get picture but I get no sound. I thought S-Video cable does both picture and sound? Am I wrong?
Thanks,
RaSeRuZ
ps. Oh and uh...how can I fix the problem? Almost forgot to write my main question. =P
Hi, I need more help...all that stuff above, it works perfectly fine.
But now I recently bought Monster Cable Video 2 S-Video Cable. Since my Onkyo 484 doesn't have an outlet for it, i hooked it up straight to my Wega 32" Tv. When I play a dvd, I get picture but I get no sound. I thought S-Video cable does both picture and sound? Am I wrong?
Thanks,
RaSeRuZ
ps. Oh and uh...how can I fix the problem? Almost forgot to write my main question. =P
So from your DVD player you have an Svideo cable to your tv, but where is the Audio going? You should have wires going from the audio out on your DVD player to the _________ In on your Onkyo. I use _______ because you probably have a TV In, DVD In, CD in.....
Then just choose that channel and you should be fine.
#14
DVD Talk Gold Edition
Join Date: Jun 2001
Location: New York, NY
Posts: 2,644
Likes: 0
Received 0 Likes
on
0 Posts
Raseruz-
It sounds like you have a Sony Wega TV, an Onkyo 484, and some model of DVD player. Do you have a VCR, TiVo, Playstation 2, or anything else that you want to hook up? Do you have cable, digital cable, or sat?
It sounds like you have a Sony Wega TV, an Onkyo 484, and some model of DVD player. Do you have a VCR, TiVo, Playstation 2, or anything else that you want to hook up? Do you have cable, digital cable, or sat?
#15
DVD Talk Legend
Originally posted by raseruz
Ohhhh...Ok. I thought it did both. Oh well, back to composite for audio...for now. Thanks RaptorsFan.
RaSeRuZ
Ohhhh...Ok. I thought it did both. Oh well, back to composite for audio...for now. Thanks RaptorsFan.
RaSeRuZ
Connect your DVD player to your TV with an s-video cable for video, then run left and right (usually white and red) audio cables to the TV for the sound.
Although really, witha surround sound system like you have, you don't need to run audio cables to the TV, just a digital audio cable to the Onkyo receiver. You'll get the sound from the surround sound system, not the TV.
#18
Member
Join Date: Aug 2000
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Hmm, how should we continue? My questions surround the 797, so I don't think it's appropriate to continue in this forum. Should I provide an e-mail address? Also, which B&M do you work for? Either Circuit City or an A/V specialist, and in what city?
#19
Member
Thread Starter
Join Date: Nov 2001
Location: New York, NY
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
skar - i've already got all my other stuff hooked up. just getting new stuff coming in and hooking it up and then screwing it up. nothing else to hook up for now, but i'll definitely let you know if i do. =P
i've got cable tv. i don't think it's digital cable.
Mr. Salty - i've got the red and white running from the dvd player to the onkyo dvd port. works fine. that's ok right? don't have digital audio cable yet, but soon.
such a lively and helpful board.
Thanks,
RaSeRuZ
i've got cable tv. i don't think it's digital cable.
Mr. Salty - i've got the red and white running from the dvd player to the onkyo dvd port. works fine. that's ok right? don't have digital audio cable yet, but soon.
such a lively and helpful board.
Thanks,
RaSeRuZ
#20
DVD Talk Special Edition
Join Date: Jun 2001
Posts: 1,358
Likes: 0
Received 0 Likes
on
0 Posts
#21
Member
Thread Starter
Join Date: Nov 2001
Location: New York, NY
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Thanks nekobus the monster cable site seems a little challenging at first, but i think i can read it. They've got many wires running all over the place.
My Onkyo 484 receiver don't have S-Video outlet. And me dvd player, Panasonic RV-30 has no 5.1 output. I dunno what that is and probably don't need to know. Right now i'm awaiting my Sony SA-WM 40 subwoofer. I know that i'm supposed to get an interconnect cable for this, but what does the internconnect cable mean? Is there like a site where I can look up all these terms and understand it?
Thanks,
RaSeRuZ
ps. I found this over at 800.com
The Impedance Rating of speakers should match the recommendations for the receiver with which they'll be used. Basically, a low impedence speaker needs more electrical current from its amplifier than a high-impedance model to produce the same level sound. An 8 ohm rating speaker is intended to work with nearly all home amplifiers and receivers.
The Minimum Wattage requirements for speakers should also be matched to their receiver to avoid "blowing" the speaker.
How do I know how many ohms i am currently using so there isn't some electrical surge? And how do I look for the minimum wattage thing so i don't blow out a speaker?
My Onkyo 484 receiver don't have S-Video outlet. And me dvd player, Panasonic RV-30 has no 5.1 output. I dunno what that is and probably don't need to know. Right now i'm awaiting my Sony SA-WM 40 subwoofer. I know that i'm supposed to get an interconnect cable for this, but what does the internconnect cable mean? Is there like a site where I can look up all these terms and understand it?
Thanks,
RaSeRuZ
ps. I found this over at 800.com
The Impedance Rating of speakers should match the recommendations for the receiver with which they'll be used. Basically, a low impedence speaker needs more electrical current from its amplifier than a high-impedance model to produce the same level sound. An 8 ohm rating speaker is intended to work with nearly all home amplifiers and receivers.
The Minimum Wattage requirements for speakers should also be matched to their receiver to avoid "blowing" the speaker.
How do I know how many ohms i am currently using so there isn't some electrical surge? And how do I look for the minimum wattage thing so i don't blow out a speaker?
Last edited by raseruz; 11-07-01 at 07:39 AM.
#22
DVD Talk Special Edition
Join Date: Jun 2001
Posts: 1,358
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by raseruz
Thanks nekobus the monster cable site seems a little challenging at first, but i think i can read it. They've got many wires running all over the place.
Thanks nekobus the monster cable site seems a little challenging at first, but i think i can read it. They've got many wires running all over the place.