Go Back  DVD Talk Forum > DVD Discussions > DVD & Home Theater Gear
Reload this Page >

Difference between HDMI AND DVI

DVD & Home Theater Gear Discuss DVD and Home Theater Equipment.

Difference between HDMI AND DVI

Old 12-06-04, 08:21 AM
  #1  
New Member
Thread Starter
 
Join Date: Dec 2004
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Difference between HDMI AND DVI

Hey guys,

Located in Singapore. Wondering if anyone could explain the diff between HDMI and DVI. Shopping for a 42 inch plasma and most come with DVI, not HDMI. Sets with HDMI cost more, at the moment.

Is it worth it to pay extra for the HDMI input or will DVI be just as good. Does HDMI provide significantly better audio? How about video, better than DVI, or the same thing?

I thank you for your patience, very new at this.
Old 12-06-04, 09:03 AM
  #2  
Senior Member
 
Join Date: Oct 2003
Posts: 682
Received 6 Likes on 5 Posts
HDMI carries the audio with the video. DVI is video only. They both have the same video quality. You can find HDMI to DVI (and reverse) adapters if you need to.
Old 12-06-04, 11:24 AM
  #3  
Member
 
Join Date: May 2000
Posts: 244
Likes: 0
Received 0 Likes on 0 Posts
There are three important differences between DVI and HDMI:

1) HDMI sends audio as well. For most home theater buffs, they use a separate audio hookup anyway, so this isn't relevant. But for some, it is important, and for others, it may be important in the future where your audio receiver serves as a HDMI switch, automatically switching audio and video at the same time.

2) HDMI supposedly allows longer cable runs. DVI runs run the risk of getting "sparklies" at lengths over 10-15 feet. HDMI supposedly can handle longer runs than that.

3) Black crush. HDMI usually uses a video black scale, and DVI uses the computer black scale. Hooking up DVI to HDMI occasionally causes "black crush" on a display. But this varies. Some equipment solves the problem internally, others have configuration options for dealing with it. But sometimes those solutions pose other problems. For instance, I can configure my projector to take either computer or video mode over DVI, but choosing video mode means I am using the projector's scaler, which I don't like as well (it causes overscan). I would recommend researching the options on your display before deciding on DVI. This problem has caused a lot of people to avoid going from DVI to HDMI and vice versa.

Personally, I bought a projector that had both inputs. Getting the HDMI input was worth a hundred or so to me.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.