Best amp between 2-3k
#1
DVD Talk Limited Edition
Thread Starter
Best amp between 2-3k
I am trying to find a good 5x amp to hook up to my Denon 3803. My budget is about 3k or less, and new or used does not matter. I am currently considering the Parasound HCA 2205AT, Sunfire, and CineNova Grande 5.
Any thoughts on which would be the best? Other suggestions?
And is there a difference between the ATI and CineNova?
Thanks for the help!
Any thoughts on which would be the best? Other suggestions?
And is there a difference between the ATI and CineNova?
Thanks for the help!
#2
Senior Member
Join Date: Aug 2000
Posts: 641
Likes: 0
Received 0 Likes
on
0 Posts
You should listen to both. Both the ATI and the Earthquake are great amps. I have an Adcom GFA-7807 which is another great choice in that price range (actually, I guess you'd be looking at the GFA-7805).
#3
DVD Talk Legend
I think I would throw Bryston. Proceed, Aragon and McIntosh if you are interested in a used component.
Might want to try www.audiogon.com for used/demo pieces.
Here is the McIntosh
http://www.mcintoshlabs.com/mcprod/s...&product=MC206
Hopefully my upgrade path will take me there.
Might want to try www.audiogon.com for used/demo pieces.
Here is the McIntosh
http://www.mcintoshlabs.com/mcprod/s...&product=MC206
Hopefully my upgrade path will take me there.
#4
DVD Talk Hero
Originally posted by gotapex
You should listen to both. Both the ATI and the Earthquake are great amps. I have an Adcom GFA-7807 which is another great choice in that price range (actually, I guess you'd be looking at the GFA-7805).
You should listen to both. Both the ATI and the Earthquake are great amps. I have an Adcom GFA-7807 which is another great choice in that price range (actually, I guess you'd be looking at the GFA-7805).
#5
Senior Member
Join Date: Dec 2002
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
for that money, i would go with rotel 1095. 200 beefy watts per channel. and why stop at just a single amp? if you can bi-amp, go with a 1095 and 1075 (120/ch). this would give you great dynamics and headroom, well above any single amp.
#6
Senior Member
Join Date: Aug 2000
Posts: 641
Likes: 0
Received 0 Likes
on
0 Posts
The GFA-7807 was tested to just over 600watts per channel at 4 ohm into all 7 channels given enough juice, though it's only rated to 450w/channel at 4 ohm (and 300w/chan at 8 ohm).
It's designer is the same guy who designed the $7500 California Audio Labs CL-2500 MCA (rated at 500w per channel into 8 ohm).
http://www.deregle.co.uk/pages/13c.htm
It's designer is the same guy who designed the $7500 California Audio Labs CL-2500 MCA (rated at 500w per channel into 8 ohm).
http://www.deregle.co.uk/pages/13c.htm
#8
Cool New Member
Join Date: Jun 2003
Location: Las Vegas, NV
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
You could also try looking at the Blue Diamond amp by Gemstone Audio. It comes in 5 and 7 channels and has a power rating of 200x5(or 7) doubling down into 4 ohms to 400x5(or 7). I think it can be had for under $2,800 for the 7 channel model and $2,300 for the 5. I hate to link it but there's a big discussion going on here and you can look at the specs here .
Regards,
Mike
Regards,
Mike
Last edited by Mikecheck; 07-25-04 at 12:14 AM.
#9
Senior Member
Join Date: Aug 2000
Posts: 641
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by cowanrg
the question of the day is, how good do adcoms sound though? they have had a pretty poor reputation lately for sound quality. i could very well be wrong too.
the question of the day is, how good do adcoms sound though? they have had a pretty poor reputation lately for sound quality. i could very well be wrong too.
#10
DVD Talk Hero
A: I cannot believe anyone would say an Adcom is not a good sounding unit.
B: If you are dropping that much $$$ you should really find a local high end audio place and work with them. They should be willing to let you have one on trial for a week or so. Or at the very least work with you and your system on finding one that "should" be good, then offer an unconditional 30 day return.
B: If you are dropping that much $$$ you should really find a local high end audio place and work with them. They should be willing to let you have one on trial for a week or so. Or at the very least work with you and your system on finding one that "should" be good, then offer an unconditional 30 day return.
#11
DVD Talk Limited Edition
Thread Starter
Originally posted by Sdallnct
A: I cannot believe anyone would say an Adcom is not a good sounding unit.
B: If you are dropping that much $$$ you should really find a local high end audio place and work with them. They should be willing to let you have one on trial for a week or so. Or at the very least work with you and your system on finding one that "should" be good, then offer an unconditional 30 day return.
A: I cannot believe anyone would say an Adcom is not a good sounding unit.
B: If you are dropping that much $$$ you should really find a local high end audio place and work with them. They should be willing to let you have one on trial for a week or so. Or at the very least work with you and your system on finding one that "should" be good, then offer an unconditional 30 day return.
#12
DVD Talk Hero
Originally posted by cpgator
Problem with these high end stores is they ususally only carry a few brands, and only the popular ones like B&K, Rotel, etc. At least with using the internet, I am able to choose from a much wider selection of amps.
Problem with these high end stores is they ususally only carry a few brands, and only the popular ones like B&K, Rotel, etc. At least with using the internet, I am able to choose from a much wider selection of amps.
Good luck...and let us know what you choose and how you like it.
#13
Senior Member
Join Date: Dec 2002
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
i had HEARD, but no documentation, from reputable friends and colleagues that their newer stuff just didnt sound all that great. could be complete bullsh** though. i was just throwing it out there.
quite frankly, in that price range, there are literally hundreds of options, and 90% of them would be great
quite frankly, in that price range, there are literally hundreds of options, and 90% of them would be great
#14
DVD Talk Hero
Originally posted by cowanrg
quite frankly, in that price range, there are literally hundreds of options, and 90% of them would be great
quite frankly, in that price range, there are literally hundreds of options, and 90% of them would be great
Is this amp going to drive the maggies? Those are great speakers, but are difficult to drive. And many amps that while by the specs might be able to drive them, the question is how easily and how will they sound.
And keep in mind sound is a preference. You are correct to say there may be hundreds of options. But, what is "great" to you might not be "great" to me. I have listened to systems with all well established components, and I did not like the sound. I have heard $10,000 systems and not liked the sound. Doesn't mean the sound was "bad". It means it was my preference. The reason there is so many options is because they sound different.
Anyway...just my nickles worth...
#18
DVD Talk Limited Edition
Thread Starter
Thanks again for the replies...
Just to keep you updated, the amp is supposed to arrive Weds via UPS. This past weekend, I added a 20amp circuit and receptacle in preparation.
Just to keep you updated, the amp is supposed to arrive Weds via UPS. This past weekend, I added a 20amp circuit and receptacle in preparation.
#19
DVD Talk Limited Edition
Thread Starter
Well I finally received the Cinenova amp yesterday, but unfortunately it is not working correctly.
When I hook up the speakers to the amp, I get static sound coming from the speakers. When I hook the amp up to my receiver through the preouts and turn it on, the static gets louder. Also, there is even some signal going to my sub, even though it is not hooked up to the amp - just the receiver.
Thinking the receiver might be partly responsible, I disconnected the Cinenova, and connected my old amp - and no problems at all.
I contacted the tech help with Earthquake yesterday- and apparently they only have 2 techs working for them, one was out of town, and the other had gone home for the day. I left my number and ended up getting a call back. The tech said it sounded like a ground loop? in the amp, and told me to touch a metal object to the end of the rca cable coming out of the amp while the amp was powered up to try to short it out?? Tried this and did not work.
Then he asked me to call back today at a specific time - and when I did, I was told he has left for the weekend and I should try back Monday!
UGH!
Any thoughts?
When I hook up the speakers to the amp, I get static sound coming from the speakers. When I hook the amp up to my receiver through the preouts and turn it on, the static gets louder. Also, there is even some signal going to my sub, even though it is not hooked up to the amp - just the receiver.
Thinking the receiver might be partly responsible, I disconnected the Cinenova, and connected my old amp - and no problems at all.
I contacted the tech help with Earthquake yesterday- and apparently they only have 2 techs working for them, one was out of town, and the other had gone home for the day. I left my number and ended up getting a call back. The tech said it sounded like a ground loop? in the amp, and told me to touch a metal object to the end of the rca cable coming out of the amp while the amp was powered up to try to short it out?? Tried this and did not work.
Then he asked me to call back today at a specific time - and when I did, I was told he has left for the weekend and I should try back Monday!
UGH!
Any thoughts?
Last edited by cpgator; 08-05-04 at 05:32 PM.
#20
DVD Talk Hall of Fame
Ground loop = hum
Your problem = hiss
I'd try taking the amp to a different room and hooking it up to different speakers. Still hissy?
(But yeah, seems like the amp has a problem.)
What kind of speakers are we talking about? More efficient speakers can make this problem worse.
Your problem = hiss
I'd try taking the amp to a different room and hooking it up to different speakers. Still hissy?
(But yeah, seems like the amp has a problem.)
What kind of speakers are we talking about? More efficient speakers can make this problem worse.
#21
DVD Talk Limited Edition
Thread Starter
Originally posted by stevevt
Ground loop = hum
Your problem = hiss
I'd try taking the amp to a different room and hooking it up to different speakers. Still hissy?
(But yeah, seems like the amp has a problem.)
What kind of speakers are we talking about? More efficient speakers can make this problem worse.
Ground loop = hum
Your problem = hiss
I'd try taking the amp to a different room and hooking it up to different speakers. Still hissy?
(But yeah, seems like the amp has a problem.)
What kind of speakers are we talking about? More efficient speakers can make this problem worse.
Probably should have gone with a different amp....
#22
DVD Talk Hall of Fame
Originally posted by cpgator
I have paradigms studios were of average efficiency - and I don't have other speakers to hook it up to.
Probably should have gone with a different amp....
I have paradigms studios were of average efficiency - and I don't have other speakers to hook it up to.
Probably should have gone with a different amp....
I'm not too familiar with this amp, but there wouldn't happen to be gain/level trim pots on the back, would there? I think my Parasound has them, but I haven't been "back there" in a while. Just thinking you might be able to back those levels off if that's an option.
If you described the problem as a hiss and they were talking about ground hum, I will go out on a limb and say you weren't talking to one of their techs. See how things shake out on Monday when you talk to a *real* tech.
Last edited by stevevt; 08-05-04 at 08:43 PM.
#23
Senior Member
Join Date: Aug 2000
Posts: 641
Likes: 0
Received 0 Likes
on
0 Posts
#24
DVD Talk Limited Edition
Thread Starter
Originally posted by stevevt
Or maybe just a not-broken version of the one you got?
Or maybe just a not-broken version of the one you got?
I'm not too familiar with this amp, but there wouldn't happen to be gain/level trim pots on the back, would there? I think my Parasound has them, but I haven't been "back there" in a while. Just thinking you might be able to back those levels off if that's an option.
If you described the problem as a hiss and they were talking about ground hum, I will go out on a limb and say you weren't talking to one of their techs. See how things shake out on Monday when you talk to a *real* tech. [/B]
If you described the problem as a hiss and they were talking about ground hum, I will go out on a limb and say you weren't talking to one of their techs. See how things shake out on Monday when you talk to a *real* tech. [/B]
The only things I have on the back are the high/low filer - which I have set to bypass so I get the full signal.
#25
DVD Talk Hall of Fame
Originally posted by cpgator
Probably should have specified that when ordering...
He was supposed to be their "master tech" or something like that...
The only things I have on the back are the high/low filer - which I have set to bypass so I get the full signal.
Probably should have specified that when ordering...
He was supposed to be their "master tech" or something like that...
The only things I have on the back are the high/low filer - which I have set to bypass so I get the full signal.