Full frame...?
#2
Senior Member
Join Date: Jun 2003
Location: Muncie, IN
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
usually 4:3 or 1.33:1 is the ratio for standard TVs.
if the original aspect ratio of the film was 4:3 then no pan and scan is needed because the entire intended image is already visable. but if the original ratio was 1.85:1 or 2.35:1 (both "widescreen") then some sort of pan and scan is used.
if the original aspect ratio of the film was 4:3 then no pan and scan is needed because the entire intended image is already visable. but if the original ratio was 1.85:1 or 2.35:1 (both "widescreen") then some sort of pan and scan is used.
#3
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Lachenaie, Québec (Canada)
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
well how do you know?
on the back of the DVD, it say :
"Aspect ratio: full frame"
it's on a Johny Mnemonic DVD (only 4$ at a local store)
if it's P&S I don't want it!...
on the back of the DVD, it say :
"Aspect ratio: full frame"
it's on a Johny Mnemonic DVD (only 4$ at a local store)
if it's P&S I don't want it!...
#5
Senior Member
Join Date: Nov 2000
Location: Bruce Campbell invented the internet...and pants.
Posts: 899
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by AOD; 07-04-03 at 07:11 PM.
#6
DVD Talk Legend
For most modern movies, Full Frame probably means "open matte" rather than "pan-n-scan"--although any open matte film is really a combination of the two in places...
Now most of the folks on this forum will tell you that open-matte is nearly as bad as pan-and-scan--and I agree with them that it's *all* about enjoying the original aspect ratio--but your mileage may vary, as they say...
Now most of the folks on this forum will tell you that open-matte is nearly as bad as pan-and-scan--and I agree with them that it's *all* about enjoying the original aspect ratio--but your mileage may vary, as they say...
#7
DVD Talk Gold Edition
Join Date: Sep 2002
Location: Hamilton, NJ
Posts: 2,539
Likes: 0
Received 0 Likes
on
0 Posts
Let's not forget open matte, brothas. Although not a movie's intended display, it's not the same as pan and scan. So, not all movies that are 1.66:1 or 1:85:1 are pan and scan.
K
Edit: Yeah, what adamblast said.
K
Edit: Yeah, what adamblast said.
#8
Rest in Peace
Join Date: Apr 2003
Location: PA/NJ Border
Posts: 1,392
Likes: 0
Received 0 Likes
on
0 Posts
First their came industry Standard at 1.33:1, then in 1953 The Robe first wide Cinemascope in 1954 20,000 Leagues Under the Sea is filmed in Cinemascope. Now a days just read the friggin cover, check with us and we'll tell you if it is what you want. LOL
#12
Banned
Join Date: Feb 2002
Posts: 464
Likes: 0
Received 0 Likes
on
0 Posts
I just got MIRACLE MILE in 1.33:1 - open matte. On my WS TV, I used the 'expand mode' to cut off the top and bottom of the image and as far as I could tell, it looked to be the OAR (no cut off heads). Lost a little resolution, but I was happy with it...
Not that this is possible with every film. Some are shot open matte with all of the area to be cut off later on either the top or bottom....
Not that this is possible with every film. Some are shot open matte with all of the area to be cut off later on either the top or bottom....
#13
DVD Talk Legend
Full Frame is a marketing term that has a friendlier connotation than P&S.
http://www.dvdtalk.com/forum/showthr...hreadid=160736
http://www.dvdtalk.com/forum/showthr...hreadid=160736