Component Cable "Switcher" ---> Where Can I Find One?
#1
Cool New Member
Thread Starter
Join Date: Sep 2001
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Component Cable "Switcher" ---> Where Can I Find One?
Component Cable "Switcher" ---> Where Can I Find One?
Dear All,
My 36" Sony XBR-250 has only one 'Component' Input, as a result everytime I want to play either of my PS2 or XBox (using Monster Cables that I purchased separately for both systems), I have to disconnect and connect the corresponding Console's Cable. (all the models after mine, have TWO Component Inputs )
Not only this is a pain in the neck, but also in the long run, I have noticed that the 'Component' connectors at the back of my TV are a bit loose (from constant connec/disconn).
I have seen SVGA Switch Boxes that allows you to click a button and choose different connection...Is there such a thing for 'Component Input' as well?
Any help would be greatly appreciated.
Dear All,
My 36" Sony XBR-250 has only one 'Component' Input, as a result everytime I want to play either of my PS2 or XBox (using Monster Cables that I purchased separately for both systems), I have to disconnect and connect the corresponding Console's Cable. (all the models after mine, have TWO Component Inputs )
Not only this is a pain in the neck, but also in the long run, I have noticed that the 'Component' connectors at the back of my TV are a bit loose (from constant connec/disconn).
I have seen SVGA Switch Boxes that allows you to click a button and choose different connection...Is there such a thing for 'Component Input' as well?
Any help would be greatly appreciated.
#2
DVD Talk Limited Edition
Join Date: Feb 2001
Location: Austin, Texas
Posts: 6,515
Likes: 0
Received 0 Likes
on
0 Posts
Check Radio Shack. A very cheap solution (and one I used to switch between PS1 and N64 years ago) is to simply use RCA Y-connectors. Granted, if you have both systems on at the same time, your picture will be very strange, but then again, you shouldn't even need to run them simultaneously.
I think the Y-connectors were about $2. I used three, one for video and two for audio.
I think the Y-connectors were about $2. I used three, one for video and two for audio.
#3
Member
Join Date: Mar 1999
Location: Mocksville, North Carolina
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
All you need to do is go to radio shack and by a stereo/video switcher. It is a passive device, and has three cables switching at any given time. It won't affect your signal, and costs 20 bucks. A real component switcher is at least 200.
This will work, and be great for you.
--Krisbee.com
This will work, and be great for you.
--Krisbee.com
#5
DVD Talk Special Edition
Join Date: Jan 2000
Location: New Hampshire
Posts: 1,128
Likes: 0
Received 0 Likes
on
0 Posts
Check out this thread - there's a bunch of useful info in there. There's a JVC that you can pick up for around $80 or $90. Also, like krisbee said, you can just get a composite switch box and use it to switch the compnent signal.
#6
Cool New Member
Thread Starter
Join Date: Sep 2001
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the response:
I indeed used my SVGA Switcher (Sony, bought it around $20 last year), and to my surprise it works!
Now one important Question:
What about loss of image quality? I have connected my XBox and PS2 (and possibly my non-progressive scan DVD) and I need to know if their image gets a bit 'degraded' since they pass through this box...
(I really don't care about HDTV signal, nor Prgressive Scan, since my TV set is NOT an HDTV nor Progressive Scan enabled)
Thanks again.
Ignore the cables connected to the Sony Switch Box, it is a picture that I took last year when my other consoles were connected, I just post the images to let you know what box I have)
I indeed used my SVGA Switcher (Sony, bought it around $20 last year), and to my surprise it works!
Now one important Question:
What about loss of image quality? I have connected my XBox and PS2 (and possibly my non-progressive scan DVD) and I need to know if their image gets a bit 'degraded' since they pass through this box...
(I really don't care about HDTV signal, nor Prgressive Scan, since my TV set is NOT an HDTV nor Progressive Scan enabled)
Thanks again.
Ignore the cables connected to the Sony Switch Box, it is a picture that I took last year when my other consoles were connected, I just post the images to let you know what box I have)
Last edited by Cannibal Corpse; 09-05-02 at 11:49 AM.
#7
DVD Talk Gold Edition
Join Date: Jun 2001
Location: New York, NY
Posts: 2,644
Likes: 0
Received 0 Likes
on
0 Posts
Cannibal - Congrats on solving your problem. Do you notice any image quality loss? If not, I wouldn't worry about it. I don't think the bandwidth needed for PS2 and Xbox is very high. And a slight image quality loss might not be noticable on a 36" screen.
One final note, the switcher appears to be an S-Video switch box, not an SVGA switch box.
One final note, the switcher appears to be an S-Video switch box, not an SVGA switch box.
#9
DVD Talk Gold Edition
Join Date: Jun 2001
Location: New York, NY
Posts: 2,644
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Cannibal Corpse
Thanks for the response:
What is the difference between a S-Video and SVGA switch box?
Thanks for the response:
What is the difference between a S-Video and SVGA switch box?
An SVGA switcher refers to a device that switches computer monitors. Something like this:
Does it really matter in regards to my currnet connection?
Thanks!