New TV and Receiver purchase...help needed
#1
DVD Talk Platinum Edition
Thread Starter
Join Date: Mar 2006
Location: Northern New Jersey...or as we say it "Sopranos Country USA"
Posts: 3,905
Likes: 0
Received 0 Likes
on
0 Posts
New TV and Receiver purchase...help needed
Hello everyone. I am new to this section of DVDTalk so bear with me if this has been asked a thousand times already.
I am in the market for a new TV and receiver for my home theater. I had purchased a 720p plasma a few years back and decided to give it to my parents who were in need of a TV. I also gave them the receiver so they can have the benefits of HDTV.
Well, after some improvements (which included a lot of new dry wall), I am getting ready to buy the new equipment. But I am totally clueless on what to buy at this point.
Here are some facts to help with recommendations:
TV Size - 42" and up is fine
1080p a must (Want to get those Hi-def DVD players)
More than 2 HDMI inputs
CableCard optional
And for the receiver:
7.1 surround (I have 7 speakers)
HDMI switching
XM Radio (I would like this, but not required)
Lastly, I might be able to do a projector, since I have room for it. But again I am clueless on what to look for. My price range is around $3500 max. So if anyone can assist me, it would be appreciated.
I am in the market for a new TV and receiver for my home theater. I had purchased a 720p plasma a few years back and decided to give it to my parents who were in need of a TV. I also gave them the receiver so they can have the benefits of HDTV.
Well, after some improvements (which included a lot of new dry wall), I am getting ready to buy the new equipment. But I am totally clueless on what to buy at this point.
Here are some facts to help with recommendations:
TV Size - 42" and up is fine
1080p a must (Want to get those Hi-def DVD players)
More than 2 HDMI inputs
CableCard optional
And for the receiver:
7.1 surround (I have 7 speakers)
HDMI switching
XM Radio (I would like this, but not required)
Lastly, I might be able to do a projector, since I have room for it. But again I am clueless on what to look for. My price range is around $3500 max. So if anyone can assist me, it would be appreciated.
#2
DVD Talk Ultimate Edition
Join Date: Feb 2000
Location: Jersey
Posts: 4,238
Likes: 0
Received 0 Likes
on
0 Posts
even though you said 1080p is a must, I will try and assist you, nice i am also from North Jersey (and REALLY in Soprano Country - Essex County).
how far are you sitting from your TV?
How large is the room?
Why do you need more than 2 HDMI inputs if your receiver has HDMI switching? You only need 1.
What speakers are you using?
Sub?
how far are you sitting from your TV?
How large is the room?
Why do you need more than 2 HDMI inputs if your receiver has HDMI switching? You only need 1.
What speakers are you using?
Sub?
#3
DVD Talk Platinum Edition
Thread Starter
Join Date: Mar 2006
Location: Northern New Jersey...or as we say it "Sopranos Country USA"
Posts: 3,905
Likes: 0
Received 0 Likes
on
0 Posts
Nice Morris County in the house here....to answer:
1. it is about 6 feet away
2. Not sure on the exact dimensions, but would say 12 X 12
3. I assumed you needed multiple inputs on the TV and switching on the receiver. So if it is just the receiver then fine.
4. Klipsch Sinergy series (6 in total)
5. Yes Klipsch Sinergy sub
Hope that helps
1. it is about 6 feet away
2. Not sure on the exact dimensions, but would say 12 X 12
3. I assumed you needed multiple inputs on the TV and switching on the receiver. So if it is just the receiver then fine.
4. Klipsch Sinergy series (6 in total)
5. Yes Klipsch Sinergy sub
Hope that helps
#5
DVD Talk Platinum Edition
Thread Starter
Join Date: Mar 2006
Location: Northern New Jersey...or as we say it "Sopranos Country USA"
Posts: 3,905
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by insanecollector
The Onkyo 605 is a must for the reciever. It will help with your requirements.
The bad: Downconverts 1080i component video signals to 720p when outputting over HDMI; HDMI video quality converted from analog sources may not satisfy videophiles; Dolby TrueHD and DTS-HD Master Audio decoding cannot be used with current crop of high-definition video players.
Now does that mean if you try to run like an upconvert DVD player or something like that, it will reduce the signal or does it mean something else?
#6
Senior Member
Join Date: Oct 2001
Posts: 674
Likes: 0
Received 0 Likes
on
0 Posts
Now does that mean if you try to run like an upconvert DVD player or something like that, it will reduce the signal or does it mean something else?
#7
DVD Talk Ultimate Edition
Join Date: Feb 2000
Location: Jersey
Posts: 4,238
Likes: 0
Received 0 Likes
on
0 Posts
if 1080p is a must (which i never understand), then go with a 46" Samsung LCD. the black levels are a big improvement over prior models and its 1080p. 46" will at least get you to a point where you may be able to see the resolution differences between 1080p and 720p.
the onkyo is a good choice only if you are staying with the 605. the 7/805 have a few issues.
i would also look at the new yamahas that are out. they have the XM radio built in as well and I love Yamahas. klipsh are horns (i think) and may go well with the yamaha.
go to 6th avenue Electronics and take a look at some tvs and listen to some receivers.
you only need one HDMI input on your tv since your receiver will be a switch. the Onkyo 605 has 2 HDMI inputs and doesnt upconvert over component. if you have more than 2 sources that are HDMI you will need a switch from monoprice.
get all of your cables from monoprice. order them in advance so you dont wait for them.
The Samsung 1080p is on sale at Circuit City right now and also at amazon with a free harmony remote. here is the fatwallet link.....
Link
that tv for around $1500 is a great price. get it soon.
everyone here loves the onkyo 605. it is a great budget receiver. if you have the extra money you can look at some other models as well.
Yamaha RX-v1800 is a SICK receiver. 130wpc, 4 hdmi in, video upconverting, xm-ready.
retail is $1300 but you can get it for under 1k if you try. NOT a budget receiver and worth every penny.
the onkyo is a good choice only if you are staying with the 605. the 7/805 have a few issues.
i would also look at the new yamahas that are out. they have the XM radio built in as well and I love Yamahas. klipsh are horns (i think) and may go well with the yamaha.
go to 6th avenue Electronics and take a look at some tvs and listen to some receivers.
you only need one HDMI input on your tv since your receiver will be a switch. the Onkyo 605 has 2 HDMI inputs and doesnt upconvert over component. if you have more than 2 sources that are HDMI you will need a switch from monoprice.
get all of your cables from monoprice. order them in advance so you dont wait for them.
The Samsung 1080p is on sale at Circuit City right now and also at amazon with a free harmony remote. here is the fatwallet link.....
Link
that tv for around $1500 is a great price. get it soon.
everyone here loves the onkyo 605. it is a great budget receiver. if you have the extra money you can look at some other models as well.
Yamaha RX-v1800 is a SICK receiver. 130wpc, 4 hdmi in, video upconverting, xm-ready.
retail is $1300 but you can get it for under 1k if you try. NOT a budget receiver and worth every penny.
#8
DVD Talk Platinum Edition
Thread Starter
Join Date: Mar 2006
Location: Northern New Jersey...or as we say it "Sopranos Country USA"
Posts: 3,905
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SoSpacey
if 1080p is a must (which i never understand), then go with a 46" Samsung LCD. the black levels are a big improvement over prior models and its 1080p. 46" will at least get you to a point where you may be able to see the resolution differences between 1080p and 720p.
the onkyo is a good choice only if you are staying with the 605. the 7/805 have a few issues.
i would also look at the new yamahas that are out. they have the XM radio built in as well and I love Yamahas. klipsh are horns (i think) and may go well with the yamaha.
go to 6th avenue Electronics and take a look at some tvs and listen to some receivers.
you only need one HDMI input on your tv since your receiver will be a switch. the Onkyo 605 has 2 HDMI inputs and doesnt upconvert over component. if you have more than 2 sources that are HDMI you will need a switch from monoprice.
get all of your cables from monoprice. order them in advance so you dont wait for them.
The Samsung 1080p is on sale at Circuit City right now and also at amazon with a free harmony remote. here is the fatwallet link.....
Link
that tv for around $1500 is a great price. get it soon.
everyone here loves the onkyo 605. it is a great budget receiver. if you have the extra money you can look at some other models as well.
Yamaha RX-v1800 is a SICK receiver. 130wpc, 4 hdmi in, video upconverting, xm-ready.
retail is $1300 but you can get it for under 1k if you try. NOT a budget receiver and worth every penny.
the onkyo is a good choice only if you are staying with the 605. the 7/805 have a few issues.
i would also look at the new yamahas that are out. they have the XM radio built in as well and I love Yamahas. klipsh are horns (i think) and may go well with the yamaha.
go to 6th avenue Electronics and take a look at some tvs and listen to some receivers.
you only need one HDMI input on your tv since your receiver will be a switch. the Onkyo 605 has 2 HDMI inputs and doesnt upconvert over component. if you have more than 2 sources that are HDMI you will need a switch from monoprice.
get all of your cables from monoprice. order them in advance so you dont wait for them.
The Samsung 1080p is on sale at Circuit City right now and also at amazon with a free harmony remote. here is the fatwallet link.....
Link
that tv for around $1500 is a great price. get it soon.
everyone here loves the onkyo 605. it is a great budget receiver. if you have the extra money you can look at some other models as well.
Yamaha RX-v1800 is a SICK receiver. 130wpc, 4 hdmi in, video upconverting, xm-ready.
retail is $1300 but you can get it for under 1k if you try. NOT a budget receiver and worth every penny.
#9
DVD Talk Limited Edition
Originally Posted by macnorton
This one does look like a good choice....but I did read this on the Cnet review:
The bad: Downconverts 1080i component video signals to 720p when outputting over HDMI; HDMI video quality converted from analog sources may not satisfy videophiles; Dolby TrueHD and DTS-HD Master Audio decoding cannot be used with current crop of high-definition video players.
Now does that mean if you try to run like an upconvert DVD player or something like that, it will reduce the signal or does it mean something else?
The bad: Downconverts 1080i component video signals to 720p when outputting over HDMI; HDMI video quality converted from analog sources may not satisfy videophiles; Dolby TrueHD and DTS-HD Master Audio decoding cannot be used with current crop of high-definition video players.
Now does that mean if you try to run like an upconvert DVD player or something like that, it will reduce the signal or does it mean something else?
#10
DVD Talk Platinum Edition
Thread Starter
Join Date: Mar 2006
Location: Northern New Jersey...or as we say it "Sopranos Country USA"
Posts: 3,905
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DJ_Longfellow
Wait, so the receiver does NOT do TrueHD and DTS-HD? I'm confused now as I was looking at the Onkyo 605.
#11
DVD Talk Hero
Originally Posted by macnorton
1080p is me future proofing. .
Sorry...couldn't help myself. What your hearing is some of do not see the benefit of 1080p in the size set you are looking at. It is not an issue of "future" technology, but your eyes. You simply will not be able to see all that resolution at that size of a set, regardless of what your are feeding that set (except a computer).
In addition, it is widely accepted that resolution is about the fourth most important factor is overall picture quality. Meaning if having the best picture possible is the most important factor, your skipping three factors that are MORE important.
For example, one of the best images I have ever seen (and consistently see) is from the Panasonic 42" and 50" plasma's that are 720p. I truely believe they have a better image then the 1080p Samsung LCD's.
Having said all that, the 46" LCD 1080p models have really come down. I actually have on my short list the Samsung LNT4661 which is $1,350 at CC after AAA discount (if you have AAA). But I'm looking at because LCD generally do better in a bright room then plasma. I'm having a hard time pulling the trigger, as I might just want to get better light control in the room and then have a noticeable better picture from the 50" Panasonic Plasma.
So I personally would not consider 1080p a need. However, if it doesn't cost any more, then I don't mind having it. And there may be other features or benefits to the set that might make it worth spending a little more for.
#12
DVD Talk Ultimate Edition
Join Date: Feb 2000
Location: Jersey
Posts: 4,238
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by macnorton
1080p is me future proofing. Only reason I want it. I can do $1300 for a receiver, then I probably won't have buy another one for quite sometime. Does the Yamaha have Dolby True HD or DTS HD? Again for future proof.
it does. here is the product page.
Link
I am tempted to sell my 1700 to get the 1800, but there are just so few differences.
#13
DVD Talk Platinum Edition
Thread Starter
Join Date: Mar 2006
Location: Northern New Jersey...or as we say it "Sopranos Country USA"
Posts: 3,905
Likes: 0
Received 0 Likes
on
0 Posts
Wanted to bump this one for a question I had about the Yamaha RX-V1800. I read this on Crutchfield from an owner...can someone explain this:
I bought this unit a while ago, but was so disappointed with one "feature" that I had to write and warn others. The HDMI video pass-through degrades the video noticeably. The only reason I paid the significant upcharge for so many extra HDMI ports was to be able to use a single remote control ... but no such luck! The professional installers who came to hook it up with my new 46" Sharp Aquos 1080p LCD even warned me, but I found it hard to believe that a $1,000 component would have any problems with pass-through video. So, we did a blind test and hooked up the video cables directly to the TV and then through the Yamaha. Wow! It was a significant AND noticeable difference. Not even close. Needless to say, I connected all video cables directly to the TV and only use the Yamaha for audio.
Even worse : I later added an XBOX360 and needed one more HDMI port on my TV. I bought a Pure-AV HDMI switch-box for about $100. Guess what? It did a flawless job of video pass through and had no degradation of quality whatsoever.
I would have thought this was just my bad luck, but a relative had the EXACT same problem with another Yamaha AV receiver. They did the same test and agreed; the Yamaha just degraded the clean HDMI video too much to bear. They bypassed their Yamaha for video and went directly to the TV with their DVD and cable box video.
I bought this unit a while ago, but was so disappointed with one "feature" that I had to write and warn others. The HDMI video pass-through degrades the video noticeably. The only reason I paid the significant upcharge for so many extra HDMI ports was to be able to use a single remote control ... but no such luck! The professional installers who came to hook it up with my new 46" Sharp Aquos 1080p LCD even warned me, but I found it hard to believe that a $1,000 component would have any problems with pass-through video. So, we did a blind test and hooked up the video cables directly to the TV and then through the Yamaha. Wow! It was a significant AND noticeable difference. Not even close. Needless to say, I connected all video cables directly to the TV and only use the Yamaha for audio.
Even worse : I later added an XBOX360 and needed one more HDMI port on my TV. I bought a Pure-AV HDMI switch-box for about $100. Guess what? It did a flawless job of video pass through and had no degradation of quality whatsoever.
I would have thought this was just my bad luck, but a relative had the EXACT same problem with another Yamaha AV receiver. They did the same test and agreed; the Yamaha just degraded the clean HDMI video too much to bear. They bypassed their Yamaha for video and went directly to the TV with their DVD and cable box video.
Last edited by macnorton; 01-25-08 at 11:40 AM.
#14
DVD Talk Reviewer
Join Date: Feb 2001
Location: Formerly known as "12thmonkey"/Frankfort, IL
Posts: 7,790
Received 35 Likes
on
31 Posts
Originally Posted by Sdallnct
For example, one of the best images I have ever seen (and consistently see) is from the Panasonic 42" and 50" plasma's that are 720p. I truely believe they have a better image then the 1080p Samsung LCD's.
I love my 50" Panny 720p.
SD DVDs look absolutely stunning via an upconverting player, and the HD-DVD titles are beyond that.
#16
DVD Talk Platinum Edition
Thread Starter
Join Date: Mar 2006
Location: Northern New Jersey...or as we say it "Sopranos Country USA"
Posts: 3,905
Likes: 0
Received 0 Likes
on
0 Posts
Ok after some research, the Yamaha RX-v1800 seems to be my best receiver bet. Still trying to figure out which TV to go with.
If I recall correctly, Panasonic makes an excellent plasma and Sharp makes an excellent LCD. Any specific models I should take a look at?
If I recall correctly, Panasonic makes an excellent plasma and Sharp makes an excellent LCD. Any specific models I should take a look at?
#17
Suspended
Join Date: Oct 2003
Posts: 3,598
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SoSpacey
the onkyo is a good choice only if you are staying with the 605. the 7/805 have a few issues.
#18
DVD Talk Ultimate Edition
Join Date: Feb 2000
Location: Jersey
Posts: 4,238
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gimmepilotwings
What issues are you referring to? I have had the 805 for a few months now, with absolutely no issues.
you' would have to ask a few people who have done some more research than I have regarding the Onkyo. i know there were threads on here that mentioned it specifically.
#19
DVD Talk Ultimate Edition
Join Date: Feb 2000
Location: Jersey
Posts: 4,238
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by macnorton
Ok after some research, the Yamaha RX-v1800 seems to be my best receiver bet. Still trying to figure out which TV to go with.
If I recall correctly, Panasonic makes an excellent plasma and Sharp makes an excellent LCD. Any specific models I should take a look at?
If I recall correctly, Panasonic makes an excellent plasma and Sharp makes an excellent LCD. Any specific models I should take a look at?
Panasonic 50PX75u
6th Avenue has it this week for $1300 which seems to be the general current bottom price for this tv.
#20
DVD Talk Platinum Edition
Thread Starter
Join Date: Mar 2006
Location: Northern New Jersey...or as we say it "Sopranos Country USA"
Posts: 3,905
Likes: 0
Received 0 Likes
on
0 Posts
The reviews look solid for 50PX75u...might buy two of them (my parents need a second one for their bed room).
#21
DVD Talk Ultimate Edition
Join Date: Feb 2000
Location: Jersey
Posts: 4,238
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by macnorton
The reviews look solid for 50PX75u...might buy two of them (my parents need a second one for their bed room).
best bang for your buck TV on the market. the pioneer is about 5% better a TV at 60% more expensive.
#22
Suspended
Join Date: Oct 2003
Posts: 3,598
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SoSpacey
you' would have to ask a few people who have done some more research than I have regarding the Onkyo. i know there were threads on here that mentioned it specifically.
#24
DVD Talk Legend
Originally Posted by DJ_Longfellow
Wait, so the receiver does NOT do TrueHD and DTS-HD? I'm confused now as I was looking at the Onkyo 605.