Activity issue with Logitech Harmony One
#1
Banned
Thread Starter
Join Date: Feb 2009
Posts: 3,039
Likes: 0
Received 0 Likes
on
0 Posts
Activity issue with Logitech Harmony One
I have a issue when using the Harmony One remote. I have a activity called Watch PS3 which is supposed to turn my TV to HDMI 2, the PS3 on and the receiver on. My TV was already on and I pushed the activity on the remote and it turned my TV off but it did turn the PS3 and the receiver on. Can anyone tell me why it turned my TV off when I didn't set it up that way and what I can do to correct this.
#2
DVD Talk Hero
Re: Activity issue with Logitech Harmony One
More importantly how did your Harmony turn on your PS3? Do you have a IR to Bluetooth adapter in the chain?
To answer your questions, on initial start up I always start from zero. Meaning everything off. Then once I'm I do the initial start up, I don't have a problem using a different activity.
To answer your questions, on initial start up I always start from zero. Meaning everything off. Then once I'm I do the initial start up, I don't have a problem using a different activity.
#3
Banned
Thread Starter
Join Date: Feb 2009
Posts: 3,039
Likes: 0
Received 0 Likes
on
0 Posts
Re: Activity issue with Logitech Harmony One
More importantly how did your Harmony turn on your PS3? Do you have a IR to Bluetooth adapter in the chain?
To answer your questions, on initial start up I always start from zero. Meaning everything off. Then once I'm I do the initial start up, I don't have a problem using a different activity.
To answer your questions, on initial start up I always start from zero. Meaning everything off. Then once I'm I do the initial start up, I don't have a problem using a different activity.
#4
DVD Talk Hero
Re: Activity issue with Logitech Harmony One
So for example I walk into my media room. Nothing is on.
I press the active "Watch Dish HD" and it,
Turns on projector and after a short delay sets it to HDMI
Turns on Dish box
Turns on receiver and to the appropriate input
Turns HDMI switch box to the appropriate input
Turns lights to TV watching level
If I then press "Watch a DVD" it already knows the pj & receiver is on and,
Doesn't do anything with the pj
Turns off the Dish box
Turns on DVD player
Changes the HDMI switcher
Changes inputs on the receiver
But if you start with something on, how does the remote know that?
#5
Cool New Member
Join Date: Jun 2009
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Re: Activity issue with Logitech Harmony One
yep, the problem is that the tv was already on. the harmony remotes keep track of the state of your devices, but they can only do that if they are starting from a known state (usually all off). since you had the tv already on manually, it would think the tv was off and then send the power signal again to turn it on but would end up turning it off.
a lot of times, if I already have stuff on and watch to switch the remote to a particular activity, I'll cover the IR emitter with my hand while switching to an activity to bypass the power on and input switch stuff.
a lot of times, if I already have stuff on and watch to switch the remote to a particular activity, I'll cover the IR emitter with my hand while switching to an activity to bypass the power on and input switch stuff.
#6
Banned by request
Re: Activity issue with Logitech Harmony One
Question for those with the Harmony One and using your blu ray player - which button do you use for the on-screen menu? There's the menu button, but that brings up the top menu for me. So how do I bring up the onscreen menu? Do I have to program it?
#7
DVD Talk Legend
Re: Activity issue with Logitech Harmony One
You might want to do some research on your brand and model of TV over at Remote Central to see if there are discrete codes for it. But I suspect that if there were, the Harmony database would have had them.
I used the factory remote to teach the separate menu keys to my Harmony One.
#9
Senior Member
Join Date: Oct 2004
Location: Long Beach, CA
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
Re: Activity issue with Logitech Harmony One
In the customize buttons menu there is an option to learn a command. Plug your remote into the usb and point the original remote approximately an inch or so away from the harmony. The screen should tell you if the command was learned successfully.
#11
DVD Talk Legend
Re: Activity issue with Logitech Harmony One
I changed the settings with the computer program. I've remapped several commands, actually. My volume buttons weren't working, so I set up volume controls, for the TV and receiver separately, on the top screen.
#12
Senior Member
Join Date: Aug 2003
Location: Twin Cities, MN
Posts: 826
Likes: 0
Received 0 Likes
on
0 Posts
Re: Activity issue with Logitech Harmony One
Meaning, to run the PS3 activity the TV does not have to already be off. However, if the TV is already on then it needs to have been turned on by the Harmony so that it realizes that the TV is already on.
So if I run my DirecTV activity, the TV is on. If I then run the PS3 activity on, it changes the input but knows the TV is already on. However, if I turn the TV on with a different remote or via the button on the set, then the remote has no way to know it was already on. It does not have the ability to determine whether or not a device is truly on at the time, it simply remembers the state based on activities run to that point.
Hopefully that makes sense.
#13
DVD Talk Legend
Re: Activity issue with Logitech Harmony One
New question (no point in starting a new thread):
I have a Oppo HDMI switch. It's hit and miss as to whether the switch receives the Harmony's signal to change inputs.
What setting is needed to either repeat the command automatically (as "insurance"), or possibly increase the length of the signal?
I have a Oppo HDMI switch. It's hit and miss as to whether the switch receives the Harmony's signal to change inputs.
What setting is needed to either repeat the command automatically (as "insurance"), or possibly increase the length of the signal?
#15
Senior Member
Join Date: Oct 2004
Location: Long Beach, CA
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
Re: Activity issue with Logitech Harmony One
If your switch has discrete commands for the inputs you could add those buttons to one of the pages within your activity for easy switching. If it just has an input toggle button you could add that as well so you could avoid having to cycle through the help questions. That way if it doesn't switch you could change the input within your activity. You'd have to add that button to all activities though. I had my old remote customized like that and it just became second nature when something wouldn't switch
#16
Banned
Thread Starter
Join Date: Feb 2009
Posts: 3,039
Likes: 0
Received 0 Likes
on
0 Posts
Re: Activity issue with Logitech Harmony One
I've got another slight problem with one of my activities on the Harmony One. This activity is called 'From PS3 to TV' and it switches my TV from HDMI 2 to HDMI 1, and ejects the DVD from the PS3 and turns the PS3 off. This works fine but when I want to turn the TV off it is still on the current activity:'From PS3 to TV' which turns off the TV but then the PS3 turns back on again. Is there any way to set this activity so the PS3 doesn't turn back on when I hit the off button on the remote. Even if I try to go to another activity it will turn the PS3 back on. Any ideas would be helpful.
#17
Suspended
Join Date: Oct 2003
Posts: 3,598
Likes: 0
Received 0 Likes
on
0 Posts
Re: Activity issue with Logitech Harmony One
I've got another slight problem with one of my activities on the Harmony One. This activity is called 'From PS3 to TV' and it switches my TV from HDMI 2 to HDMI 1, and ejects the DVD from the PS3 and turns the PS3 off. This works fine but when I want to turn the TV off it is still on the current activity:'From PS3 to TV' which turns off the TV but then the PS3 turns back on again. Is there any way to set this activity so the PS3 doesn't turn back on when I hit the off button on the remote. Even if I try to go to another activity it will turn the PS3 back on. Any ideas would be helpful.
#18
Banned
Thread Starter
Join Date: Feb 2009
Posts: 3,039
Likes: 0
Received 0 Likes
on
0 Posts
Re: Activity issue with Logitech Harmony One
I think I figured out what to do. I will just create another activity so it won't turn on the PS3.
#20
DVD Talk Limited Edition
Re: Activity issue with Logitech Harmony One
The custom settings should allow for getting the granular level of control you need.
I actually created a power-down activity which reverts the TV back to the satellite input and puts the receiver back to the audio for that input and then powers those devices down. Any other devices I was using get powered down automatically by the activity switch (except for the DirecTV HDVR which I've instructed the Harmony One to never power off).